Daico

Showing all 45 results

2″ CIP USDA Hose, 10′ Lengths – DIHSE-2
2″ Stainless Steel Tri-clamp Cap with Welded 1/2″ FNPT Coupling – 2SSTC-Cap- 025
3″ Valve and Stainless Steel Fittings – Opelika – FTG-Opelika
4″ Stainless Steel Tri-clamp Cap with Welded 1/2″ FNPT Coupling – 4SSTC-Cap- 025
Baytown Memory Upgrade and Programming
Carbon Dioxide Diffuser – CO2DIFF
CIP Stainless Steel Fittings – 2 – end caps, 4 – 2″x3″ Reducer, 4 – 3″x4″ Reducer – CIP-FTGS
CIP Stainless Steel Hose Cart – DICT-1
CMS Programming Jeffesonville – Auto Tank Change and Loop Adjust
Daico Labor (cost per person per day)
Daico Ozone Lab Test Stand with Controller, Cable and Stand – OzoneLabTest
Daico Ozone Return Line with Valves – OzoneReturn
Daico Travel and Expenses (cost per person per day)
Daico WQMS 1″ Sample Cell (pH, Ozone, Chlorine) – WQMSCell100
Injector Transition Fitting – Triclamp to FNMPT
Install Pyxis Chorine Controllers – Jacksonville
Mineral Skid Drain Pipe (2 sections) – Detroit
Miscellaneous Push Connect Fittings and Tubing – Stockton
Miscellaneous Stainless Steel Fittings and Gaskets – Opelika
Ozone Filler Bypass – includes 3/4″ Tri-clamp Tee, 2 Tri-Clamp Valves and Tri-Clamp Cap – Daico-OFB
Ozone Generator Vibration Dampening Mounts
Ozone Probe – Rebuild
Ozone Probe – Test and Evaluation
Ozone Probe Polarizer – Ozone Analyzer, Sample Cell, Cable, Power Suppy, Brackets and Fittings – Daico-OPP
Ozone Strainer (Only) – 2.75″ OD, 42″ long, 316L SS, Slot 0.002″
Ozone Strainer (With Housing) – 2.75″ OD, 42″ long, 316L SS, Slot 0.002″
Ozone System – Bracket for Ozone Probe- includes flowmeter and fittings – OZPB-1
Programming RO (if needed) for DDA Chemical Feed Pump – Cost per RO
Rebuild – 2 DME375 – Rebuild 2
Rebuild – 2 DME375 and 1 Keystone Actuator – Rebuild1
Set of 6 Manway I-Bolts – DIASW-1
Stainless Steel Fitting – 2″x2″ Internally Lined Y – FTG 2×2 Lined Y
Stainless Steel Fittings – 2″x2″ Custom Tee
Stainless Steel Fittings – 2″x3″ Reducer – FTG 2×3 Red
Stainless Steel Fittings – 2″x4″ Tri-Clamp Reducer – FTG 2×4 TC Red
Stainless Steel Fittings – 3″x4″ Reducer – FTG 3×4 Red
WQMS 3/4″ Sample Cell (TDS) – WQMSCell075
WQMS Probe Fitting – Female – 22MP-FEM
WQMS Sample Cell Mounting Bracket – WQMSCellBracket
Venturi Assembly
4” Diameter Acrylic Site Glass – 5416AMP-4x.350-Acrylic
MINERAL SKID FUNNEL – DWM-MSF
MINERAL SKID FUNNEL LID – DWM-MSFL
Mineral Skid Mixer Impeller – 3″ Diameter; 3/4″ Shaft – 8004K12
Mineral Skid Mixer Shaft 3/4″ – MSShaft

Daico

2″ CIP USDA Hose, 10′ Lengths – DIHSE-2

2″ Stainless Steel Tri-clamp Cap with Welded 1/2″ FNPT Coupling – 2SSTC-Cap- 025

3″ Valve and Stainless Steel Fittings – Opelika – FTG-Opelika

4″ Stainless Steel Tri-clamp Cap with Welded 1/2″ FNPT Coupling – 4SSTC-Cap- 025

Baytown Memory Upgrade and Programming

Carbon Dioxide Diffuser – CO2DIFF

CIP Stainless Steel Fittings – 2 – end caps, 4 – 2″x3″ Reducer, 4 – 3″x4″ Reducer – CIP-FTGS

CIP Stainless Steel Hose Cart – DICT-1

CMS Programming Jeffesonville – Auto Tank Change and Loop Adjust

Daico Labor (cost per person per day)

Daico Ozone Lab Test Stand with Controller, Cable and Stand – OzoneLabTest

Daico Ozone Return Line with Valves – OzoneReturn

Daico Travel and Expenses (cost per person per day)

Daico WQMS 1″ Sample Cell (pH, Ozone, Chlorine) – WQMSCell100

Injector Transition Fitting – Triclamp to FNMPT

Install Pyxis Chorine Controllers – Jacksonville

Mineral Skid Drain Pipe (2 sections) – Detroit

Miscellaneous Push Connect Fittings and Tubing – Stockton

Miscellaneous Stainless Steel Fittings and Gaskets – Opelika

Ozone Filler Bypass – includes 3/4″ Tri-clamp Tee, 2 Tri-Clamp Valves and Tri-Clamp Cap – Daico-OFB

Ozone Generator Vibration Dampening Mounts

Ozone Probe – Rebuild

Ozone Probe – Test and Evaluation

Ozone Probe Polarizer – Ozone Analyzer, Sample Cell, Cable, Power Suppy, Brackets and Fittings – Daico-OPP

Ozone Strainer (Only) – 2.75″ OD, 42″ long, 316L SS, Slot 0.002″

Ozone Strainer (With Housing) – 2.75″ OD, 42″ long, 316L SS, Slot 0.002″

Ozone System – Bracket for Ozone Probe- includes flowmeter and fittings – OZPB-1

Programming RO (if needed) for DDA Chemical Feed Pump – Cost per RO

Rebuild – 2 DME375 – Rebuild 2

Rebuild – 2 DME375 and 1 Keystone Actuator – Rebuild1

Set of 6 Manway I-Bolts – DIASW-1

Stainless Steel Fitting – 2″x2″ Internally Lined Y – FTG 2×2 Lined Y

Stainless Steel Fittings – 2″x2″ Custom Tee

Stainless Steel Fittings – 2″x3″ Reducer – FTG 2×3 Red

Stainless Steel Fittings – 2″x4″ Tri-Clamp Reducer – FTG 2×4 TC Red

Stainless Steel Fittings – 3″x4″ Reducer – FTG 3×4 Red

WQMS 3/4″ Sample Cell (TDS) – WQMSCell075

WQMS Probe Fitting – Female – 22MP-FEM

WQMS Sample Cell Mounting Bracket – WQMSCellBracket

Venturi Assembly

4” Diameter Acrylic Site Glass – 5416AMP-4x.350-Acrylic

MINERAL SKID FUNNEL – DWM-MSF

MINERAL SKID FUNNEL LID – DWM-MSFL

Mineral Skid Mixer Impeller – 3″ Diameter; 3/4″ Shaft – 8004K12

Mineral Skid Mixer Shaft 3/4″ – MSShaft